Colour Clad Profiles manufacture 3m Corner Flashings (Barge Board) on site here in Somerset. We fold and press our trims on our state of the art breakpress which delivers a quality result every time with pinpoint accuracy. These corner trims are manufactured in a Plain Galvanised finish. All our trims are made using Prime 0.7mm thick material and are supplied with safety welted edges which minimise sharp edges and offers a more ridged product.
Flashings and trims are a great way to finish off your roofing project, they deliver a quality finish on the corners and ridges of your roof. They also ensure you have a water tight roof allowing any rain water to run down the facia. We recommend fixing your flashings using our MS202/G16 stitching screws which fix through the ridge of the sheet and self-tighten the flashings to the roofing sheets. If you have a run over 3m you are trying to cover you would ideally lap each flashing by 150mm to allow a secure fitted lap. If you require any more detail or would like some advice please call 01278 557002.
FLASHING MEASUREMENTS
-
Flashing Length: 3000mm (3m)
-
Flashing Depths: 195mm x 195mm with a 10mm safety welt on each open edge
-
Internal Angle: 90 degree
-
Sheet Thickness: 0.7mm
-
Weight 6kg per/3m approx.
- Colours: Galvanised
